How to paint steel bero doors
Painting your steel bero doors allows you to express your creativity and match your room's design. It is simple to decorate your steel almihar doors with your own design with a little planning ahead of time.
The first step is to apply a base coat or primer, followed by an MFC top coat or finishing coat to your steel bero. After that, apply the topcoat of your choice. MFC primers and topcoats are widely available in all good DIY stores, and they are both inexpensive and simple to apply.
After sanding all sides and edges to be painted, we recommend wiping down the door with sugar soap and a soft cloth to clean and degrease the panels.
Before painting the door panels, either mask the door frames with masking tape or disassemble the doors. The doors are relatively simple to disassemble and reassemble; however, we recommend that you read the following article before disassembling your doors: How to assemble our sliding wardrobe doors - coming soon
Depending on the finish you want and the type of paint you use, you can either spray paint the wardrobe doors with the final coat or use a small foam roller to achieve a smooth, brushstroke-free finish.
If you want a perfectly flat gloss finish, you should talk to your near steel bero manufacturers spray painting the doors and finishing them with a lacquer topcoat.
0 Comments